Skip to main content
Published 6 min readBy Pinn.Media team

Maintenance agreements for HVAC and home services

What to put in an HVAC maintenance agreement, how to price it, how to sell it at the end of a job, and how to schedule every tune-up without a spreadsheet.
  • Bringing customers back
  • Guides by industry
  • Getting paid

An HVAC maintenance agreement is a plan where the customer pays a monthly or yearly fee for scheduled tune-ups and a few agreed extras. For the customer, it means the system gets checked before the hot and cold seasons. For you, it means booked work in quieter months and customers who call you first when something breaks.

This guide covers what to include, how to price a plan, how to sell it without a hard pitch, and how to run the visits and billing. It is written for HVAC, but the same approach works for plumbing, pest control, pool care, and other trades with routine service.

Why plans suit the trade

Almost every customer has equipment that needs checking. The US Energy Information Administration found 88% of US households used air conditioning in 2020, and two-thirds used central air or a central heat pump as their main equipment. Use was highest in the South at 93% and the Midwest at 92%.[3]

The work, though, arrives in spikes. The Bureau of Labor Statistics notes that HVAC technicians may be on call for emergencies and work overtime or irregular schedules during peak heating and cooling seasons.[4] A plan moves tune-ups into the spring and fall shoulder months, so your technicians are busy when the phone is quiet and free when the first heat wave hits.

Why customers say yes

Customers are more likely to sign up when the reason is clear and comes from someone other than you. ENERGY STAR recommends annual pre-season checkups by a contractor, with the cooling system checked in spring and the heating system in fall, because contractors get busy once summer and winter arrive.[1]

The same checklist says dirty filters raise energy costs and can damage equipment and lead to early failure, and that airflow problems can cut a system's efficiency by up to 15 percent.[1] The US Department of Energy says routinely replacing or cleaning air filters can lower an air conditioner's energy use by 5 to 15 percent.[2]

Quote those sources on your plan page if you like. Do not promise a customer a specific saving on their bill, because every home and system is different.

What to put in the agreement

  • The visits. How many a year and when, for example one cooling tune-up in spring and one heating tune-up in fall.
  • What each visit covers. List the checks in plain words. The ENERGY STAR checklist is a good starting point: thermostat settings, electrical connections, moving parts, the condensate drain, coils, refrigerant level, and, for heating, gas or oil connections, burner combustion, and the heat exchanger.[1]
  • The extras. Benefits you choose to offer, such as priority booking during a heat wave or a set discount on repairs. Only offer what you can deliver in your busiest week.
  • What is not included. Parts, refrigerant, and repairs found during a visit are usually quoted separately. Say so up front.
  • Term, renewal, and cancellation. How long the plan runs, whether it renews on its own, how much notice you give before a renewal or price change, and how to cancel.

Put a one-paragraph summary at the top of the agreement and on the sign-up page, so the customer sees the deal before the detail. A version to adapt, with a made-up company and price:

"Comfort Plan from Northside Heating & Air: $25 a month or $280 a year. Includes a cooling tune-up each spring and a heating tune-up each fall, priority booking for repair calls, and 10% off repair labor. Parts, refrigerant, and repairs are quoted before any work. Renews each year. We remind you 30 days before renewal, and you can cancel online or by phone at any time."

If the plan renews and charges automatically, federal and state renewal laws apply. Our guide to automatic renewal laws explains the consent, reminder, and cancellation rules. Have a lawyer review the agreement before you sell it.

Pricing a plan

Start from your costs, not a competitor's price. Work out the time and materials for each visit, add travel, and decide how much the extras will cost you over a year.

The BLS puts the median pay for HVAC mechanics and installers at $29.33 an hour in May 2025.[4] Your loaded cost is higher once you add payroll taxes, insurance, the van, and fuel. Here is an illustration with assumed figures, not data from a real business. Say each tune-up takes a technician 1.5 hours including travel, at a loaded cost of $60 an hour, plus $15 of filters and supplies. Two visits cost $210 a year. Add an allowance for priority calls and your margin, and you might set the plan at $25 a month or $280 paid yearly. A yearly payment is 1 charge instead of 12, so there are fewer chances for a card to fail.

Review the price every year against what the visits really took. If tune-ups often run long, your price or your checklist needs to change.

Selling it at the end of the job

The best moment to offer a plan is when a technician has just fixed something and the customer is relieved. Give technicians a short, honest line to use, such as: "Most of what I fixed today shows up early in a tune-up. Want us to check it every spring and fall?" Then let the customer sign up on the spot.

  • On site: a sign-up the customer can complete on their phone before the technician leaves.
  • On the invoice: a line about the plan and a link, sent with the payment request.
  • In season: a spring and fall message to past customers who are not on a plan yet.
  • After a breakdown call: a follow-up a few days later, when the cost of the repair is still fresh.

Running visits without a spreadsheet

Plans fail quietly when visits are not booked. Every member needs a due date for each visit, a reminder that goes out a few weeks before, and an easy way to pick a time. Track how many members are overdue each month, because an overdue member is likely to cancel at renewal.

Watch 3 numbers: members, visits completed on time, and renewals. A plan that grows but misses visits is storing up cancellations.

How this works in Pinn.Media CRM

Our payments area bills plans on a fixed schedule and retries a failed card automatically. Technicians can take tap payments and send invoices from the mobile app at the job, so the first payment can be taken before they leave the driveway.

Automations can send a reminder when each customer's service is due, using the date on their record, and can start a renewal sequence when an agreement is close to ending. Reminders go out through messaging at $0.0249 a segment for texts and $2.03 per 1,000 emails, at published rates.

See how a home services business uses repeat work to fill the quiet months, or read our guide to getting invoices paid by text.

Thinking about a maintenance plan for your customers? Book a walkthrough and we will show you the billing, reminders, and renewals together, or compare plans.

Sources

  1. Maintenance ChecklistENERGY STAR, US Environmental Protection Agency and Department of Energy
  2. Energy Saver 101: Everything You Need to Know About Home CoolingUS Department of Energy, Energy Saver infographic
  3. Nearly 90% of U.S. households used air conditioning in 2020US Energy Information Administration, Today in Energy, May 31, 2022From the 2020 Residential Energy Consumption Survey.
  4. Occupational Outlook Handbook: Heating, Air Conditioning, and Refrigeration Mechanics and InstallersUS Bureau of Labor Statistics, May 2025 wage data

Features in this post

Let us set up your CRM.

Start the trial, or talk it through with the person who would build your account.

Prefer to talk now? Call +1 833-719-7466.

  • Setup, data moves, and training by our team, free on yearly plans
  • 14 days to try it on your own business
  • Usage rates published before you spend

By continuing you agree to the Terms of service and Privacy policy.